Dimension Drawing; Service And Support - Siemens Simatic RF382R Scanmode Operating Instructions Manual

Dimension drawing

Figure 7 Dimension drawing
Service & Support
Technical Support
You can access technical support for all IA/DT projects via the following:
● Phone: + 49 (0) 180 5050 222
(€ 0.14 /min. from the German landline network, deviating mobile communications prices are possible)
● E-mail (mailto:support.automation@siemens.com)
● Internet: Online support request form: (www.siemens.com/automation/support-request)
Service & support at IA/DT
Support homepage (www.siemens.com/automation/service&support)
RFID homepage
For general information about our identification systems, visit RFID homepage (www.siemens.com/simatic-sensors/rf).
FCC Information to the user:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
Siemens AG
Industry Sector
Postfach 48 48
90026 NÜRNBERG
SIMATIC RF382R Scanmode
SIMATIC RF382R Scanmode
J31069-D0214-U001-A1-7618, 10/2009
J31069-D0214-U001-A1-7618, 10/2009
11