Sony SCD-XA333ES Operating Instructions Manual page 25

7
Press l AMS L.
The balance adjustment display appears.
In stop mode, the test tone is output from the selected
speaker.
Example: When you select "SURR BALANCE"
during stop mode, the test tone is output
from the front speakers and surround
speakers.
TEXT DISC
F R T : _ _ _ _ _ : S U R R
8
Turn l AMS L to adjust the output level.
TEXT DISC
F R T : _ _ _ _ _ : S U R R
9
Press l AMS L.
The player status returns to Step 6.
Repeat Step 6 through 9 for more adjustments.
10
Press MENU after you finish adjusting.
The display returns to the normal display.
Adjusting the output level from the remote Z
You can adjust the output level of each speaker from the
listening position by using the supplied remote.
1
Press LEVEL ADJ during playback or stop mode.
During playback, go to Step 4.
2
Press ./> repeatedly until "TONE ON"
appears in the display.
3
Press ENTER.
The test tone issues from the speakers in sequence
with the speaker type appearing in the display.
4
Press ./> repeatedly until the desired item
appears in the display.
Select the item from "CNTR BALANCE," "SURR
BALANCE," or "SW BALANCE."
Note
When you set the Sub woofer to "––" in the Multi-channel
playback mode (page 23), "SW BALANCE" does not appear.
Similarly, "CNTR BALANCE" or "SURR BALANCE" does
not appear when you set the corresponding speaker to "––."
1 2 3 4 5
SUPER AUDIO
CD
6 7 8 9 10
MULTI CH
16 17 18 19 20
1 2 3 4 5
SUPER AUDIO
CD
6 7 8 9 10
MULTI CH
16 17 18 19 20
5
Press ENTER.
The balance adjustment display appears.
In stop mode, the test tone is output from the selected
speaker.
Example: When you select "SURR BALANCE"
during stop mode, the test tone is output
from the front speakers and surround
speakers.
TEXT DISC
F R T : _ _ _ _ _ : S U R R
6
Press ./> repeatedly to adjust the output
level.
TEXT DISC
F R T : _ _ _ _ _ : S U R R
7
Press ENTER.
The player status returns to Step 4.
Repeat Step 4 through 7 for more adjustments.
8
Press LEVEL ADJ after you finish adjusting.
The display returns to the normal display.
Note
If you select a playback mode other than "2CH Direct" or "MCH
Direct" using the Multi-channel management function, the sound
distribution to the speakers will change, possibly causing a
decrease in overall sound volume. If this occurs, adjust the
volume with the volume control on the connected amplifier.
Note on the ANALOG output jacks (SCD-XA777ES
only)
This player is equipped with a Tri-Powered D/A Converter
System and a Multi Channel Management function. The usable
output settings differ depending on the mode you select as
follows. For details, refer to the Operating Instructions.
Multi Channel
Source
Managment
CD Not available when
playing back CDs
Super Audio CD Direct
(2 channel) 2ch + SW
Super Audio CD Direct
(Multi-channel) Except Direct
Note on 2 channel playback of Super Audio CDs
If you select "2ch + SW," the output setting becomes 3 channel
and the playback sound is output from the 5.1 CH OUT jacks.
Therefore, no sound is output from the 2 CH OUT jacks or
PHONES jack.
1 2 3 4 5
SUPER AUDIO
CD
6 7 8 9 10
MULTI CH
16 17 18 19 20
1 2 3 4 5
SUPER AUDIO
CD
6 7 8 9 10
MULTI CH
16 17 18 19 20
2CH OUT 5.1CH OUT PHONES
jacks jacks jack
a a
a a
a
a
a
25
GB