Table of Contents
Advertisement
ATTENTION: During transport, make sure that the flightcase is not tilted sideways by more than 9
degrees.
III. Flightcase
The Flightcase is designed to fit through a door with a width of 85cm and a standard height of 200cm. Due
to its dimensions and weight (~750kg including Studiolifter and Studioframe) at least 2 people are required
to move the WOWMAKER.
If a loading ramp or a forklift is available on site, a small van with a loading area of at least 302cm is sufficient.
Otherwise, a 7.5t truck with a lifting platform should be used.
ATTENTION: Observe the load limits of the tail lift.
2
2
1
1
Corner castor wheels with brakes
2
Weight empty approx. 250kg; weight with WOWMAKER approx. 750kg
2
Butterfly locks
5
2
2
1
2
2
Advertisement
Table of Contents
