Caleg WOWMAKER M 130 General Operating Instructions page 10

STEP 3: Open the back door of the Studiolifter. Insert the cable end with the Neutrik plug from the outside in
through the brush strip and connect it to the socket strip.
Lock in place with a 1/8 turn and insert the wired remote control from the inside out. Close the door again
(does not have to be locked).
ATTENTION: If the power supply is protected with 16A, the supplied Neutrik power cable can be
used to power the multi outlet for both circuits of the display. Alternatively, both display circuits can
be protected separately with 10A each.
ATTENTION: Make sure that the cables are not pinched!
10