ACS 753, ACS 763, ACS 863 Service Manual
TANK FILL PROCESS
During the Tank Fill process the compressor, fan, tank fill, and oil return solenoids are activated. The output state
of the tank fill solenoid is controlled to maintain 2.4 bar (35 psi) in the accumulator, and is based on the ambient
temperature which can vary depending on the temperature reading from the temperature sensor. When the ISV
reaches the "target" weight, all components are deactivated.
Robert Bosch GmbH
FLOW DIAGRAMS
Figure 4-7. Tank Fill
87
Plumbing and Mechanical
SP00D00609
2018-03-26