ACS 753, ACS 763, ACS 863 Service Manual
DEEP RECOVERY PROCESS
During the Deep Recovery process, the recover solenoid is deactivated, high side, and low side inlet solenoids
remain activated. The vacuum pump, compressor, and deep recover solenoids are activated. The output state of
the oil return and power charge solenoids are controlled to maintain 0 to 207 mbar (3 psi) in the accumulator.
Robert Bosch GmbH
Figure 4-11. Deep Recover
91
Plumbing and Mechanical
SP00D00609
2018-03-26