Introduction; Safety Instructions - York HIC4008B21S Installation And Maintenance Manual

Inverter-driven multi-split system heat pump air conditioners, 4-way cassette
Hide thumbs Also See for HIC4008B21S:
Table of Contents

Advertisement

1.

Introduction

Read following sections carefully before installing this product.
Read over the "Installation and Maintenance Manual" for the outdoor unit as well.
Forward this information, and the warranty to all installers and users.
Ask end users to maintain copies for future reference.
(Refrigerant Piping Work)
● For details on wiring between the indoor unit and the outdoor unit, refer to the "Installation and Maintenance
Manual" for the outdoor unit.
● For details on the optional decorative panel, refer to the "Installation and Maintenance Manual" for the
optional decorative panel.
● For details on the optional controller, refer to the "Installation and Maintenance Manual" for that optional
controller module.
● For details on each optional part, refer to the "Installation and Maintenance Manual" for each optional part.
● For central controller, refer to the "Installation and Maintenance Manual" for the central controller.
2.

Safety Instructions

Signal Words
General Precautions
This system should be installed by personnel certified by Johnson Controls, Inc. Personnel must be
qualified according to local, state and national building and safety codes and regulations. Incorrect
installation could cause leaks, electric shock, fire or explosion. In areas where Seismic ''Performance
requirements are specified, the appropriate measures should be taken during installation to guard
against possible damage or injury that might occur in an earthquake if the unit is not installed
correctly, injuries may occur due to a falling unit.
Use appropriate Personal Protective Equipment (PPE), such as gloves and protective goggles and,
where appropriate, have a gas mask nearby. Also use electrical protection equipment and tools suited
for electrical operation purposes. Keep a wet cloth and a fire extinguisher nearby during brazing. Use
care in handling, rigging, and setting of bulky equipment.
When transporting, be careful when picking up, moving and mounting these units. Although the
unit may be packed using plastic straps, do not use them for transporting the unit from one location
to another. Do not stand on or put any material on the unit. Get a partner to help, and bend with
your knees when lifting to reduce strain on your back. Sharp edges or thin aluminum fins on the air
conditioner can cut fingers, so wear protective gloves.
P5417054
(Electrical Wiring Work)
Indicates a hazardous situation that, if not avoided, could result in death
or serious injury.
Indicates a hazardous situation that, if not avoided, could result in minor or
moderate injury.
Indicates information considered important, but not hazard-related (for
example, messages relating to property damage).
To reduce the risk of serious injury or death, read these instructions
thoroughly and follow all warnings or cautions included in all manuals
that accompanied the product and are attached to the unit. Refer back to
these safety instructions as needed.
(Ref. Charge Work)
(Test Run)
(User)
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents