Victaulic 725S Series Installation And Operating Instructions

Diverter valve

Download this manual

INSTALLATION AND OPERATING INSTRUCTIONS

Series 725S Diverter Valve

• Read and understand all instructions before attempting to install any Victaulic products.

• Always verify that the piping system has been completely depressurized and drained immediately prior to installation, removal, adjustment,

or maintenance of any Victaulic products.

• Wear safety glasses, hardhat, foot protection, and hearing protection.

Failure to follow these instructions could result in death or serious personal injury and property damage.

REV_B

WARNING

I-725S

Need help?

Do you have a question about the 725S Series and is the answer not in the manual?

Page 1 Series 725S Diverter Valve WARNING • Read and understand all instructions before attempting to install any Victaulic products. • Always verify that the piping system has been completely depressurized and drained immediately prior to installation, removal, adjustment, or maintenance of any Victaulic products.
Page 2 I-725S / Series 725S Diverter Valve / Installation and Operating Instructions DIVERTER VALVE COMPONENTS Item # Description Hex Socket Head Cap Screw Spring Lock Washer Inlet Cap Upper Shaft Bearing Cover O-Ring Backup Ring Plug O-Ring Backup Ring Lower Shaft Bearing Body Seal Body Thrust Bearing...
Page 3 Victaulic products. • Cut grooved pipe ends, for use with Victaulic EndSeal™ couplings • Double grooved pipe ends, for use with Victaulic Style 808 couplings Lifting • Pipe prepared with rings, for use with Victaulic Style 809 couplings...
Page 4 For complete contact information, visit victaulic.com I-725S 11665 REV B UPDATED 05/2019 Z000725S00 VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY AND/OR ITS AFFILIATED ENTITIES IN THE UNITED STATES AND/OR OTHER COUNTRIES. © 2019 VICTAULIC COMPANY. ALL RIGHTS RESERVED.