Aukey EP-T10 User Manual page 12

LED Status Indicator (Earbuds) Status
White flashing rapidly on the right earbud Pairing mode / Incoming call
White off Connected / Playing music
White flashing twice every 5 seconds Low battery
White breathing light Charging
Fully charged
White off (after charging)
LED Charging Indicator (Charging case) Status
White on for 30 seconds Charging earbuds
White flashing four times every second Low battery
White flashing twice every second Charging
White on (after charging) Fully charged
FAQ
The earbuds are on but not connecting to my device
For the earbuds and your device to establish a connection, you need to put them both
in pairing mode. Please follow the instructions in the "Pairing" section of this manual.
My device can't find "AUKEY EP-T10" on the pairing list when trying to pair
Make sure the earbuds are on and in pairing mode (right earbud flashes white rapidly; see
the "Pairing" section of this manual). Otherwise, restart your device and the earbuds; then
try pairing again.
-10 -