Aukey EP-T10 User Manual page 10

● If the left and right earbuds don't connect with each other, touch and hold the
multi-function buttons on both earbuds for 5 seconds. You will hear a tone when the
left and right earbuds are connected successfully
● The earbuds will automatically shut down after 5 minutes in pairing mode if no
devices are paired
● If the earbuds don't enter pairing mode, double-tap the multi-function button on the
right earbud
● If one of the earbuds has no sound output, put both earbuds back into the charging
case and take them out again
● The maximum wireless operating range is 10m (33ft). If you exceed this range, the
earbuds will disconnect from your paired device and you'll hear a voice notification.
The connection will be re-established once you re-enter the wireless range within 5
minutes. The earbuds will automatically reconnect to the last-paired device. To
connect with other devices, repeat the previous "Pairing" steps
Controls & LED Indicators
Streaming Audio
Once paired, you can wirelessly stream audio from your device to the earbuds. Music
will automatically pause when you receive an incoming phone call and resume once
the call is ended.
- 08 -