Aukey EP-B60 User Manual page 8

LED Indicator
White & green flashing alternately
White flashing twice every 5 seconds
White flashing once every 5 seconds
White flashing once every second
Green flashing twice every 5 seconds
Green
Green off (after charging)
FAQ
The earbuds are on but not connecting to my device
For the earbuds and your device to establish a connection, you need to
put them both in pairing mode. Please follow the instructions in the
"Pairing" section of this manual.
I've established a connection with my smartphone but can't hear any sound
Double-check the volume level on your smartphone and the earbuds.
Some smartphones require you to set up the earbuds as an audio output
device before the audio can be transmitted. If you're using a music player
or other device, please make sure it supports the A2DP stereo music profile.
The sound isn't very clear or the caller can't hear my voice clearly
Adjust the volume on your smartphone and the earbuds. Try getting
closer to your smartphone to rule out the possibility of interference or
wireless range-related issues.
What is the wireless range of the earbuds?
Pairing mode
Standby mode / Disconnected
Connected / Playing music
Low battery
Fully charged
- 06 -
Status
In call
Charging