Aukey EP-B60 User Manual page 6

Pairing
Starting with the earbuds magnetically connected:
1. Separate the earbuds. The EP-B60 will turn on and automatically enter
pairing mode
2. Turn on Bluetooth on the device you want to pair with the earbuds
3. In the list of available devices, find and select "AUKEY EP-B60"
4. If a code or PIN is required for pairing, enter "0000"
Notes
● To clear the pairing list, power on the earbuds and then hold volume
+ and volume - simultaneously for 5 seconds until the LED lights up
green and white. Once the pairing list is cleared, you will hear a tone
and the earbuds will automatically enter pairing mode
● The earbuds will automatically shut down after 5 minutes in pairing
mode if no devices are paired
● If your paired device is turned off or manually disconnected, the
earbuds LED indicator will flash white twice every 5 seconds and the
earbuds will shut down after 5 minutes
● Double-press the multi-function button after turning off Bluetooth on a
connected device to enter pairing mode. The LED indicator will flash
white and green alternately for 3 minutes. If no devices are paired,
the earbuds will enter standby mode
● The maximum wireless operating range is 10m (33ft). If you exceed this
range, the earbuds will disconnect from your paired device and you
will hear a tone. The connection will be re-established once you
re-enter the wireless range within 5 minutes. The earbuds will automatically
reconnect to the last-paired device. To connect with other devices,
repeat the previous "Pairing" steps
- 04 -