Mounting; Mounting In The Switching Cabinet - Leuze lumiflex ASM1E Connecting And Operating Instructions

4

Mounting

4.1

Mounting in the switching cabinet

The AS-i safety monitor is mounted on 35mm standard rails acc. to DIN EN 50022 in
the switching cabinet.
Attention!
The housing of the AS-i safety monitor is not suitable for open wall mounting. Provide a
protective housing in all cases when the device is not mounted in the switching cabinet.
Fig. 4.1-1: Mounting
To mount, position the device on the bottom edge of the standard rail and then snap it
onto the upper edge.
80 ASM1, ASM1E