Organisational Measures - Leuze lumiflex ASM1E Connecting And Operating Instructions

Examples for the use of the AS-i safety monitor:
The safety monitor is used commercially in machines and systems in which the
standard AS-i bus functions as the local bus. Thus, by using the safety monitor as a
bus subscriber, existing AS-i bus configurations can be expanded easily and safety
elements with corresponding "AS-i safety at work" interface easily integrated. If a safety
component does not have an "AS-i safety at work" interface, a so-called coupling
module can be used to make the connection. Existing AS-i master and AS-i power
supply units can continue to be used.
There are no branch-specific restrictions. Several of the primary areas of application
are listed here:
• Machine tools
• Expanded machining machines with multiple control elements and safety sensors
for wood and metal applications
• Printing and paper processing machines, cutting machines
• Packaging machines, single and as part of a system
• Food processing equipment
• Piece and bulk material transport systems
• Machinery in the rubber and plastics industry
• Assembly machines and manipulators
2.3

Organisational measures

Documentation
All entries in this operating manual must be heeded, in particular those in the sections
"Safety Notices" and "Commissioning".
Keep this operating manual in a safe place. It should be accessible at all times.
Safety regulations
Observe the locally applicable legal regulations and the rules of the employer's liability
insurance association.
Qualified personnel
Mounting, commissioning and maintenance of the device may only be carried out by
qualified personnel.
Work on electrical installations may only be carried out by qualified electricians.
Settings and changes of the device configuration via PC and asimon configuration
software must only be performed by an authorised safety officer.
The password for changing a device configuration is to be held under lock and key by
the safety officer.
Repair
Repairs, in particular the opening of the housing, may only be carried out by the
manufacturer or a person authorised by the manufacturer.
74 ASM1, ASM1E