Different Types Of As-I Safety Monitors - Leuze lumiflex ASM1E Connecting And Operating Instructions

1.8

Different types of AS-i safety monitors

The safety monitor is available in a total of four versions which differ with regard to the
functions provided by the operating software and the initial configuration.
The "Basic" and "Enhanced" functions differ as follows:
Number of functional components at logic level
OR gates (inputs)
AND gates (inputs)
Safe time function, turn-on and turn-off delay
Function "button"
Safety guard/module with debouncing
Deactivation of functional components
Error release
Diagnosis stop
Support of A/B technology for non-safe slaves
New functional components (flip-flop, pulse with pos. edge, etc.)
Dummy module (NOP)
Table 1.8-1:
Notice!
A detailed description of all functions can be found in the user manual for the asimon
configuration software.
Initial configuration
ASM1/1 and ASM1E/1
ASM1/2 and ASM1E/2
Features of device versions
Number of output circuits
Table 1.8-2:
72
"Basic" and "Enhanced" functions
One output circuit
Two output circuits
1
2
Features of device versions
ASM1, ASM1E
"Basic" "Enhanced"
32
2
–
no
no
no
yes
yes
yes
yes
no
yes
Functions
"Basic" "Enhanced"
ASM1/1 ASM1E/1
ASM1/2 ASM1E/2
48
6
6
yes
yes
yes
yes
yes
yes
yes
yes
yes