Table of Contents
Advertisement
1-Port OC-192/STM-64 POS/RPR XFP SPA LEDs
Figure 18: 1-Port OC-192/STM-64 POS/RPR XFP SPA Faceplate
1
WRAP LED
2
PASSTHRU LED
3
MATESYNC LED
The following table describes the 1-Port OC-192/STM-64 POS/RPR XFP SPA LEDs.
Table 17: 1-Port OC-192/STM-64 POS/RPR XFP SPA LEDs
LED Label
WRAP
PASSTHRU
MATESYNC
CARRIER
ACTIVE
Cisco ASR 9000 Series Aggregation Services Router SIP and SPA Hardware Installation Guide
26
4
CARRIER LED
5
ACTIVE LED
6
STATUS LED
Color
State
Meaning
Off
Off
Port is not in wrap mode.
Green
On
Port is in wrap mode somewhere on the ring.
Amber
On
Port is in wrap mode locally.
Port is not in pass-through mode.
Off
Off
Amber
On
Port is in pass-through mode.
Off
Off
Mate port is not synchronized.
Green
On
Mate port is synchronized.
Port is not enabled by software.
Off
Off
Green
On
Port is enabled by software, and there is a valid SONET signal without
alarms.
Amber
On
Port is enabled by software, and there is at least one alarm (LOS, LOF, RDI,
and so on).
Blinking
SRP mode mismatch alarm is indicated.
Off
Port is not enabled by software.
Off
Green
On
Port is enabled by software, and loopback is off.
Amber
On
Port is enabled by software, and loopback is on.
Overview: Cisco ASR 9000 Series Router Shared Port Adapters
Advertisement
Table of Contents
