Listening To Tracks In A Desired Sequence (Program Play); Adjusting The Sound (Virtual-Surround • 6-Band Equalizer); Varying The Virtual Sound To Create Different Acoustics; Surround) - Sony Walkman MZ-N910 Operating Instructions Manual

Listening to tracks in a
desired sequence (Program
Play)
1
While playing, press
P MODE/
"PGM" appears in the display.
2
Slide the jog lever repeatedly to select
a track, and then press to enter that
track.
Programmed sequence
Track
number
3
Repeat step 2 to program more tracks.
You can program up to 20 tracks.
4
After programming the tracks, press
the jog lever for 2 seconds or more.
The program is stored and playback
starts from the first track.
z
The program play setting will remain in
memory even after playback finishes or is
stopped.
Note
If you open the lid, all program settings are
canceled.
For the recorder operation, see
page 61.
34
repeatedly until
Adjusting the sound
(Virtual-Surround • 6-
Band Equalizer)
You can vary the virtual sound to create
different acoustics, or modify the sound to
suit your taste and store it for later use.
The following two effect can be selected.
V-SUR (Virtual-Surround VPT
Acoustic Engine)
Provides 4 kinds of virtual surround
conditions.
6-BAND EQUALIZER
Provides 6 different sound qualities.
Volume control
Jog lever
(., >, ENT)
Varying the virtual sound to
create different acoustics
(Virtual-Surround)
1
While playing, press SOUND
repeatedly to select "V-SUR"
2
Press SOUND for 2 seconds or more.
3
Slide the jog lever repeatedly to select
the surround mode.
A
Each time you slide the jog lever, A
and B change as follows:
A
STUDIO
SOUND
B
B
V-SUR S