Listening To Tracks In A Desired Sequence (Program Play); Adjusting The Sound (Virtual-Surround • 6-Band Equalizer); Varying The Virtual Sound To Create Different Acoustics; (Virtual-Surround) - Sony Walkman MZ-N710 Operating Instructions Manual

Listening to tracks in a
desired sequence (Program
Play)
1
During playback, press
P MODE/
"PGM" appears in the display.
2
Slide the jog lever repeatedly to select
a track, and then press the jog lever to
enter that track.
Track
number
3
Repeat step 2 to program more tracks.
You can program up to 20 tracks.
4
After programming the tracks, press
and hold the jog lever for 2 seconds or
more.
The program is stored and playback
starts from the first track.
z
The program play settings will remain in
memory even after playback finishes or is
stopped.
Note
All program settings are lost when the lid of the
recorder is opened.
For the recorder operation, see
page 54.
34
repeatedly until
Programmed sequence
Adjusting the sound
(Virtual-Surround • 6-
Band Equalizer)
You can vary the virtual sound to create
different acoustics, or modify the sound to
suit your taste and store it for later use.
The following two effects can be selected:
V-SUR (Virtual-Surround VPT
Acoustic Engine):
Provides 4 kinds of virtual surround
conditions.
6-BAND EQUALIZER:
Provides 6 different sound qualities
Volume Control
Jog lever
Varying the virtual sound to
create different acoustics

(Virtual-Surround)

1
During playback, press SOUND
repeatedly to select "V-SUR".
2
Press and hold SOUND for 2 seconds
or more.
3
Slide the jog lever repeatedly to select
the surround mode.
A
Each time you slide the jog lever, A
and B change as follows:
A
STUDIO
LIVE
.
SOUND
B
B
V-SUR S
V-SUR L