Table of Contents
Advertisement
grooves. As shown below.
2.
Use water to flush the prism surface.
3.
Use a dust-free cloth to wipe the prism
surface.
Auto Measurements
After placing the measurement liquid on the
prism, close the prism cover to start
measuring. The measurement result will
display on the LCD and save to memory
automatically (see Section 5-2). If ERR is
shown, an error has occurred, refer to
Section 5-3-2.
14
RF153-en-GB_V1.1 11/18
Advertisement
Table of Contents
Need help?
Do you have a question about the RF153 and is the answer not in the manual?
Questions and answers