Table of Contents
Advertisement
Select Measurement Units
Short press UNIT to select Brix unit (%) or
RI (refractive index). Long press UNIT to
select the temperature units (
Adding a sample to the prism
1.
Use a dust-free cloth to wipe (gently)
the prism surface.
2.
Use a non-metallic spoon or dropper
to place the sample on the prism (0.3
ml, approximately), to begin
measuring. As shown below.
Replacing a sample
1.
Incline 45 degrees to allow the
measured sample to spill out along the
13
RF153-en-GB_V1.1 11/18
o
C/
o
F).
Advertisement
Table of Contents
Need help?
Do you have a question about the RF153 and is the answer not in the manual?
Questions and answers