Installing And Connecting - Binatone ACTIVE XA2020 Instruction Manual

25.Telephone line jack – to connect the phone to the telephone
line.
26.Base unit AC adapter– to connect the base unit to the 220V AC
mains.
27.Telephone line cord – to connect the phone to the telephone
line.
28.P-T switch – to change dialing mode (pulse/tone).
29.Charger– to charge the additional handset.
30.Charger AC adapter jack – to connect the AC adapter to the
battery charger.
31.Charger AC adapter – to connect the charger to the 220V AC
mains.
32.Charger indicator light – lights when you place the handset on
the charger.
33.Additional handset – only in Active Twin XA2020.
Model ACTIVE XA 2020:
1. Handset – 1
2. Base unit – 1
3. Phone line cord – 1
4. AC Adapter – 1
5. Rechargeable battery – 1
6. Battery compartment cover – 1
7. Handset belt clip – 1
Model ACTIVE TWIN XA2020:
1. Handset – 2
2. Base unit – 1
3. Battery charger – 1
4. Phone line cord – 1
5. Base unit AC Adapter – 1
6. Charger AC Adapter – 1
7. Rechargeable battery – 2
8. Battery compartment cover – 2
9. Handset belt clip – 2
INSTALLING AND
CONNECTING
1. Insert the rechargeable battery [19] into the battery compartment
[20] on the handsets [1] and [33] (only Twin XA2020), then close
the battery compartment with the cover [21] (see Fig. C).
2. Connect one end of the phone line cord [27] to the phone line jack
[25] at the base unit [13] rear side, and the other end of the phone
line cord [27] to the phone line socket (see Fig. D).
3. Insert the AC adapter [26] cable plug into its jack [24] at the
base unit [13] rear side. Insert the AC adapter [26] plug into a
wall outlet of your 220V electric mains (see Fig. D). In case of
Twin XA2020 you should also insert the charger AC adapter
Figure E
(only Twin XA2020)
In your package