Fan Motor - Toshiba RAS-4M27U2AVG-E Service Manual

No. Part name

Fan motor

1) Perform works of Detachment 1 of 1 and 2 .
8
2) Take off flange nut which fixes the fan motor and
the propeller fan.
∗ The flange nut is loosened by turning it clockwise.
(To tighten the flange nut, turn it counterclockwise.)
3) Remove the propeller fan.
4) Remove the relay connector for fan motor from the
inverter.
5) Remove the fan motor lead from the fan motor
lead fixing rubber of the penetrating part of the
partition plate.
6) Take off the fixing screws (4 pcs. each) while
supporting the fan motor so that it does not fall.
∗ Caution to assembly of fan motor
• Tighten the flange nut with 4.95N•m (50kgf•cm).
• Adjust length of the fan motor lead fixing
• There provided at 2 positions the grooves
Motor base
Detail A Detail A Detail A
Using the metal band of the motor base, be sure
to fix the fan motor lead to the motor base so that
the fan motor lead does not come to contact with
the propeller fan.
Procedure
rubber so that the slackened fan motor lead
does not come to contact with the propeller fan.
Put in the fan motor lead fixing rubber to the
partition plate so that the projection comes to
the refrigerating cycle side.
to pass the fan motor lead wire into the
motor base. Use the lower groove.
Detail A
Lower groove Lower groove Lower groove
CAUTION
- 100 -
FILE NO. SVM-18052
Remarks
Propeller fan
Loosened by Loosened by Loosened by
turning clockwise turning clockwise turning clockwise
Flange nut Flange nut Flange nut
Propeller fan
Fan motor Fan motor Fan motor
Fan motor relay connector
Fan motor lead fixing rubber
Projection/Refrigerating Projection/Refrigerating Projection/Refrigerating
cycle side cycle side cycle side
Fan motor