Discharge Port Cabinet; Rear Cabinet - Toshiba RAS-4M27U2AVG-E Service Manual

No. Part name
1. Detachment
Discharge
2
port cabinet
1. Detachment

Rear cabinet

3
Procedure
1) Perform work of Detachment 1 of 1 .
2) Take off screws for the discharge port cabinet
and the partition plate. (ST1T Ø4 × 8, 3 pcs.)
3) Take off screws for the discharge port cabinet
and the bottom plate.
(Hexagonal screw Ø4 × 10, 2 pcs.)
4) Take off screws for the discharge port cabinet
and the motor base. (ST1T Ø4 × 8, 2 pcs.)
5) Take off screw for the discharge port cabinet
and the heat exchanger.
(ST1T Ø4 × 8, 1 pc.)
6) Take off screws for the discharge port cabinet
and the fin guard.
(Hexagonal screw Ø4 × 10, 2 pcs.)
1) Perform work of Detachment 1 of
2) Take off screw for the rear cabinet and the
valve fixed board.
(Hexagonal screw Ø4 × 10, 2 pcs.)
3) Take off screw for the rear cabinet and the
anchor board.
(Hexagonal screw Ø4 × 10, 1 pc.)
4) Take off screws for the rear cabinet and the
heat exchanger.
(Hexagonal screw Ø4 × 10, 3 pcs.)
5) Remove the rear cabinet by shifting it
obliquely backward and upward.
.
1
- 94 -
FILE NO. SVM-18052
Remarks
Rear cabinet Rear cabinet Rear cabinet
In In Inv v v er er erter assemb ter ter assemb assembly ly ly
Rear cabinet Rear cabinet Rear cabinet