Basic Items For Service; Check Points After Servicing; Jigs List - Pioneer PD-30-K Service Manual

1

3. BASIC ITEMS FOR SERVICE

3.1 CHECK POINTS AFTER SERVICING

Items to be checked after servicing
A
To keep the product quality after servicing, confirm recommended check points shown below.
No.
1 Check the firmware version in the test mode.
2 Confirm whether the customer complain has been solved.
3 Check the CD playback.
(Track search)
4 Check the SACD playback.
(Track search)
B
5 Check the playback of the music file of supporting file format
with the USB port of the front.
6 Check the appearance of the product.
See the table below for the items to be checked regarding audio.
Item to be checked regarding audio
Distortion
Noise
C
Volume too low
Volume too high
Volume fluctuating
Sound interrupted
D

3.2 JIGS LIST

Jigs List
Jig Name
Service remote control unit
E
Cleaning
Before shipping out the product, be sure to clean the following positions by using the prescribed cleaning tools.
Position to be cleaned
Pickup lens
F
6
1
2
Procedure
Part No.
GGF1381
Name
Cleaning liquied
Cleaning paper
PD-30-K
2
3
The firmware version must be the latest one.
If it is not the latest one, be sure to update it.
The customer complain must not be reappeared.
Audio and operations must be normal.
Audio and operations (search etc.) must be normal.
Audio and operations (search etc.) must be normal.
Audio and operations (search etc.) must be normal.
No scratches or dirt on its appearance after receiving it
for service.
Test mode
Part No.
GEM1004 Refer to "7. DISASSEMBLY".
GED-008
3
4
Check points
Remarks
Remarks
4