Service Mode; Test Mode - Pioneer PD-30-K Service Manual

1

6. SERVICE MODE

6.1 TEST MODE

POWER ON
A
POWER
ON
B
DISC SET
<TRAY OPEN>
OPEN/CLOSE
(Player)
C
TEST MODE: PLAY
<PLAY>
Press the PLAY key
(d) of the normal
remote control unit.
D
Notes:
• The audio signal are outputted during the test mode.
• The SKIP key and the SCAN key are effective during the test mode.
TEST MODE: OFF
ESC
E
Service remote control unit
(GGF1381)
F
28
1
2
DVD disc
ESC
Service remote control unit
(GGF1381)
POWER
OFF
2
3
<TRAY CLOSE>
OPEN/CLOSE
(Player)
5
An error rate is displayed
9 9 0 E – 6
The error rate is displayed as above.
But this means " 9.90E – 6 ".
• Calculation of the average error rate
For DVDs: OK with 5.0e-4 or less,
for CDs: OK with 7.6e-3 or less
Note:
Even if you intend to continuously use the unit after
displaying the error rate, be sure to turn the power
off then back on.
PD-30-K
3
4
4