Disassembly - Pioneer PD-30-K Service Manual

1

7. DISASSEMBLY

A
Note:
(1) Do NOT look directly into the pickup lens. The laser beam may cause eye injury.
(2) Even if the unit shown in the photos and illustrations in this manual may differ from your product, the
procedures described here are common.
[1] Tray Front
Remove the Cabinet top by removing the nine screws.
(1) u Press the STANDBY/ON button to turn on
the power.
(2) Press the h button to open the tray.
B
(3) Remove the tray front by removing the three
hooks.
(4) Press the h button to close the tray.
(5) u Press the STANDBY/ON button to turn off
the power.
C
D
• How to open the Tray when the power cannot be turned on
When the Tray cannot be opened because the power cannot be turned on, it can be opened using the thin minus
screwdriver. Insert a thin minus screwdriver in a slit, and slide Rack loading of MECHA Assy in the arrow direction of the
figure. If the Tray pops out a little, fully pull it out by hand.
Thin minus screwdriver
E
Rack loading
MECHA Assy (Bottom view)
F
30
1
2
1 5
Tray front
• Bottom view
3 3
Tray open
PD-30-K
2
3
3
2 4
4
2
3
Slit
Thin minus screwdriver
3
4
4