Connection To A Network; Cable Connection; Settings Of The Recorder - YOKOGAWA SmartDac + GX10 User Manual

Connection to a Network
Cable Connection
Settings of the Recorder
Path
Description
IM 04L51B01-18EN
Connect the Ethernet cable to the Ethernet port provided on the back of the recorder.
Be sure to connect an Ethernet cable with an FCC-compliant plug. Not doing so may cause
a malfunction.
Ethernet port
IP Address, Host Information, and DNS Setting, etc.
GX/GP: See section 1.17, "Configuring the Ethernet Communication Function" in the
User's manual (IM 04L51B01-01EN) .
GM: See section 2.18, "Configuring the Ethernet Communication Function," in the User's
Manual (IM 04L55B01-01EN).
EtherNet/IP Server Settings
GX/GP: MENU key > Browse tab > Setting > Setting menu Communication (Ethernet)
settings > Server settings > Server list
Web browser: Config. tab > Communication (Ethernet) settings > Server list
Hardware configurator: Communication (Ethernet) settings > Server list
EtherNet/IP
Setup Item
On/Off
On/Off
Specify On to enable the EtherNet/IP server.
Note
On a GX/GP, you can check the EtherNet/IP server settings on the Network Information screen.
You can open the Network Information Screen by pressing the MENU key, tap the Browse tab >
Network information.
Ethernet port
Selectable Range or Options
Off, On
Ethernet port
Default Value
Off
3