Step 3: Connecting The Video Cords - Sony DVP-K56P Operating Instructions Manual

Step 3: Connecting the Video Cords

Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns A through C, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver).
In order to view progressive signal (525p or 625p) pictures with a compatible TV, projector, or
monitor, you must use pattern C.
A
(yellow)
INPUT
VIDEO
L
AUDIO
R
TV, projector, or AV
amplifier (receiver)
to LINE OUT (VIDEO)
(green)
Component video
cord (not supplied)
l : Signal flow
* Note that using the COMPONENT VIDEO OUT jacks will cause the picture to go blank. In this case, press
the PROGRESSIVE button for more than three seconds. Repeat this step until you see the picture.
If you are connecting to a video input jack
A
Connect the yellow plug of an audio/video cord (not supplied) to the yellow (video) jack. You
will enjoy standard quality images.
With this connection, select "LINE OUT/S VIDEO OUT" (default) by pressing the
PROGRESSIVE button on the front panel.
Audio/video
cord (not supplied)
(yellow)
to COMPONENT
VIDEO OUT*
(blue) (red)
S VIDEO cord
(not supplied)
TV, projector, or AV
amplifier (receiver)
to S VIDEO OUT
TV, projector, or AV
amplifier (receiver)
INPUT
B
S VIDEO
CD/DVD player
C
COMPONENT
VIDEO IN
Y
(green)
P /C
B B
(blue)
P /C
R R
(red)
,continued
15