Sony DVP-F11 Operating Instructions Manual page 52

Settings for Sound (AUDIO SETUP)
pDTS
Selects output DTS signals via the OPTICAL and
COAXIAL connectors. You cannot select this item when
you set "DIGITAL OUT" to "OFF."
• OFF: when the player is connected to an audio
component lacking a built-in DTS decoder.
• ON: when the player is connected to an audio
component having a built-in DTS decoder.
Note
Select the setting correctly. Otherwise, no sound or strange
sound will come out from the speakers, affecting your ears or
causing the speakers to be damaged.
• Do not play the DTS sound tracks without
connecting the player to an audio component
having a built-in DTS decoder. You cannot hear
the DTS sound unless you connect the player to
an audio component having a built-in DTS
decoder.
• When you play the DTS sound track on a CD, a
loud noise may come out from the LINE OUT
(AUDIO 1, 2) and PHONES connectors, affecting
your ears or causing the speakers or
headphones to be damaged.
• When you play the DTS sound track on a DVD,
no sounds will come out from the LINE OUT
(AUDIO 1, 2) and PHONES connectors.
Notes on playing the DTS sound tracks on a CD
• Do not play the DTS sound tracks without connecting the
player to an audio component having a built-in DTS decoder.
The player outputs the DTS signal via the OPTICAL and
COAXIAL connectors even if "DTS" in "AUDIO SETUP" is set
to "OFF" in the setup display, affecting your ears or causing the
speakers to be damaged.
• The DTS indicator on the front panel does not light up even if
the player outputs DTS signal via the OPTICAL and COAXIAL
connectors.
• Set the sounds to "STEREO" when you play the DTS sound
tracks on a CD. (See "Changing the Sounds" on page 32.) If
you set the sounds to "1/L" or "2/R," no sounds will come out
from the OPTICAL and COAXIAL connectors.
Notes on playing the DTS sound tracks on a DVD
• No sounds will come out from the LINE OUT (AUDIO 1, 2)
and PHONES connectors.
• If the player is connected to an audio component lacking a
built-in DTS decoder, do not set "DTS" in "DIGITAL OUT" to
"ON" in the setup display. Otherwise, when you play the DTS
sound track, a loud noise will come out from the speakers,
affecting your ears or causing the speakers to be damaged.
• When you set "DTS" in "AUDIO SETUP" to "OFF," no sound
will come out from the OPTICAL and COAXIAL connectors
even if you play DTS sound tracks on DVDs.
• The DTS indicator on the front panel display lights up when
you play DTS sound tracks.
52