For alarm settings, refer to P.20
Chap. 8.5.2.10 - Micro-interruption alarm
management, refer to
The alarm cannot be manually reset. Now press one of keys
or
to scroll pages back.
For alarm settings, refer to P.8
Chap. 7.6
threshold 2 (
). For further information on alarm management, refer to
(n=1,2,3,4,5)
.
This alarm cannot be manually reset from the Current Alarm Menu, but through the Reset Menu (
menu
).
Press one of keys
For further information on alarm management, refer to
(n=1,2,3,4,5) alarm.
This alarm cannot be manually reset from the Current Alarm Menu, but through the Reset Menu (
menu
).
Press one of keys
To quit the Current Alarm Menu and go back to the Measurement Menu press key
cosphi value and the alarm icon will be displayed on the top left. The alarm will be anyway active in the Current Alarm
Menu.
USING THE CONTROLLER
GO BACK TO
CONTENTS
GO BACK TO
MU-MID-R5-D-ENG.doc
–
Micro-interruption duration (
–
Presence of blocking reactors, P.10
,
or
to scroll the screens of banks from 2 to 5.
,
or
to scroll the screens of banks from 2 to 5.
Chap. 7.6
.
,
The next 5 displayed pages relate to the bank n breakage
(n=1,2,3,4,5) alarm. At first the screen relating to bank 1 will be
displayed and it will be alternately shown with the numerical value
corresponding to the bank estimated reactive power (2.50kVAr in
the example shown).
The next 5 displayed pages relate to the alarm maximum number
of bank n insertions (n=1,2,3,4,5). At first the screen relating to
bank 1 will be displayed and it will be alternately shown with the
numerical value (truncated to the thousands) corresponding to the
number of bank insertions (101000 in the example shown).
Chap. 8.5.2.12 - Maximum number of bank n insertions
). For further information on alarm
or
to scroll the pages or one of keys
–
Fault threshold 1 and P.12
Chap. 8.5.2.11 - Bank n breakage alarm
for more than 2sec. The
–
Fault
Chap. 8.6 - Reset
Chap. 8.6 - Reset
Page47 of 70