A Larm Management And Display - Ducati R5 Assembly And Use Instructions

8.5 Alarm management and display
8.5.1 Current alarm menu
The Current Alarm Menu can be accessed from the Measurement Menu by simultaneously pressing keys
for more than 2sec. The controller will display the following screen:
Menu can be accessed only if there is at least one current alarm, otherwise pressing the previous keys will not have
any effect.
NOTE: no page will be available for non-active alarms, but all the pages of the Current Alarm Menu are described
hereinafter in the correct displaying sequence as if all alarms were simultaneously active.
Press key to reset the alarm (function possible only if P.13
Now press one of keys
For alarm settings, refer to
For further information on alarm management, refer to
For alarm settings, refer to
For further information on alarm management, refer to
For alarm settings, refer to
further information on alarm management, refer to
MU-MID-R5-D-ENG.doc
, to scroll the pages or one of keys
The next displayed page relates to the overvoltage alarm that will
be alternately shown with the numerical value corresponding to the
maximum voltage value measured since alarm activation (450V in
the example shown).
Chap. 7.5.1 - Overvoltage alarm threshold
Chap. 8.5.2.1 - Overvoltage alarm
The next displayed page relates to the overcurrent alarm that will
be alternately shown with the numerical value corresponding to the
maximum current value measured since alarm activation (5.5A in
the example shown).
Chap. 7.5.3 - Overcurrent alarm threshold
Chap. 8.5.2.2 - Overcurrent alarm
The next displayed page relates to the low voltage alarm that will
be alternately shown with the numerical value corresponding to the
minimum voltage value measured since alarm activation (0V in the
example shown).
Chap. 7.5.5 - Low voltage alarm threshold
Chap. 8.5.2.3 - Low voltage alarm
The next displayed page relates to the low current alarm that will
be alternately shown with the numerical value corresponding to
the minimum current value measured since alarm activation (0A in
the example shown).
–
Current alarm reset =
or to scroll pages back.
Chap. 7.5.2 - Overvoltage alarm delay
and
.
Chap. 7.5.4 - Overcurrent alarm delay
and
.
Chap. 7.5.6 - Low voltage alarm delay
and
.
and
" "
Chap. 7.6
ON , refer to
. For
Page45 of 70
).
.
.