Alarm Statistics - Ducati R5 Assembly And Use Instructions

The next displayed page relates to the estimated reactive power ESt of the first capacitor bank. The following screen
will appear:
that will be alternately shown with the numerical value.
NOTE: the displayed value does not relate to the set capacitor nominal voltage, but to the actually measured network
voltage.
The next 4 pages show the estimated reactive power of banks from 2 to 5.
To quit the Statistics Menu and go back to the Measurement Menu press key
USING THE CONTROLLER
GO BACK TO
CONTENTS
GO BACK TO

8.4.2 Alarm statistics

To reach the section devoted to alarm statistics, scroll pages by pressing one of keys
screen relating to the overvoltage alarm is displayed:
that will be alternately shown with the numerical value corresponding to the alarm activations.
For alarm settings, refer to
The next displayed page relates to the overcurrent alarm. The following screen will appear:
that will be alternately shown with the numerical value corresponding to the alarm activations.
For alarm settings, refer to
The next displayed page relates to the low voltage alarm. The following screen will appear:
that will be alternately shown with the numerical value corresponding to the alarm activations.
For alarm settings, refer to
The next displayed page relates to the low current alarm. The following screen will appear:
MU-MID-R5-D-ENG.doc
Chap. 7.5.1 - Overvoltage alarm threshold
Chap. 7.5.3 - Overcurrent alarm threshold
Chap. 7.5.5 - Low voltage alarm threshold
for more than 2sec.
,
Chap. 7.5.2 - Overvoltage alarm delay
and
Chap. 7.5.4 - Overcurrent alarm delay
and
Chap. 7.5.6 - Low voltage alarm delay
and
or until the
.
.
.
Page42 of 70