Location And Mounting - Ecler essentials eCMP8 User Manual

7. LOCATION AND MOUNTING

The following general rules shall be observed:
 Always install the unit on solid and firm surfaces.
 Make sure that the surface where the loudspeaker is to be installed can support its
weight.
 eCOMP8: The depth of the speaker is 280mm. Note that if you add the mounting
bracket, the total depth will be 334mm.
 eCMP12: The depth of the speaker is 378mm. Note that if you add the mounting
bracket, the total depth will be 443mm.
 Always use a safety sling to ensure speaker installation.
 For good sound reproduction there should be no obstacle between the speakers
and the audience.
High frequencies, unlike low frequencies, are extremely directive and any obstacle
implies an attenuation in their response.
8