Ecler essentials eHORN10 User Manual

Specialized loudspeakers, long throw horn

Advertisement

Quick Links

eHORN10
SPECIALIZED LOUDSPEAKERS
Long Throw Horn

USER MANUAL

Advertisement

Table of Contents
loading

Summary of Contents for Ecler essentials eHORN10

  • Page 1: User Manual

    SPECIALIZED LOUDSPEAKERS Long Throw Horn USER MANUAL...
  • Page 2: Table Of Contents

    INDEX IMPORTANT REMARK ..................3 IMPORTANT SAFETY INSTRUCTIONS .............. 4 IMPORTANT NOTE ..................6 INTRODUCTION ..................... 6 MAIN SPECIFICATIONS ................... 6 CONNECTING ....................7 LOCATION AND INSTALLATION ..............8 TECHNICAL SPECIFICATIONS ................9 CONTENTS OF THE PACKAGE ................. 9...
  • Page 3: Important Remark

    1. IMPORTANT REMARK The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
  • Page 4: Important Safety Instructions

    2. IMPORTANT SAFETY INSTRUCTIONS Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  • Page 5 NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 6: Important Note

    Technical Services. 4. INTRODUCTION The eHORN10 is a long throw & full-range horn, prepared for outdoor operation. It incorporates a 10-inch low-frequency transducer and a 1.7-inch high-frequency transducer providing 250 W/8 Ω. A 100/70 V line transformer with power options of 240 W/120 W/60 W/8 Ω.
  • Page 7: Connecting

    6. CONNECTING The eHORN10 operates into high or low impedance. For this reason, it incorporates an NL8 Speakon© connector that allows its operational mode to be configured. The NL8 Speakon© connector is configured according to the connection diagram shown below As supplied, this connector can be used pre- configured for operation with a 70/100V 240 W line.
  • Page 8: Location And Installation

    Note: The loudspeaker distribution along a 70/100V line historically arises from the technical requirement to mix loudspeakers of different impedances and/or powers on the same amplification line or channel, but without any need to worry about the total impedance of the full assembly. Moreover, this solution enables long cable runs with significantly smaller sections that those usually employed in low-impedance installations, but with minimum power losses.
  • Page 9: Technical Specifications

    IP rating IP46 Finish colour Black Material ABS Dimensions (W x D x H) 425 x 630 x 452mm Weight 32.0 kg 9. CONTENTS OF THE PACKAGE • eHORN10 • NL8 Speakon© connector • User’s quick guide • Warranty card...
  • Page 10 product characteristics subject variation production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications. Motors, 166‐168 08038 Barcelona ‐ Spain ‐ (+34) 932238403 information@ecler.es www.ecler.com...

Table of Contents