Advertisement
Available languages
Available languages
6.2.2. Connecting the monitor
Selecting the power source for the monitor, and connecting it.
BASIC INSTALLATION: Supplying the monitor via the 12V adapter (included).
1.
Plug the 12V adapter into the cigarette lighter socket..
2.
Connect the adapter to the monitor's power input.
3.
Press ON/OFF button on monitor.
INSTALLATION WITH CABLE
Connecting the monitor with a cable to the car's power source.
1.
Read the manufacturer's operating instructions before trying to install the monitor, so that neither the vehicle's computer system nor other
important operating systems are interfered with. Before using the cable set, it is highly recommended to consult with a car mechanic, or to have
the installation completed professionally by a car mechanic.
ATTENTION: The supplier is not liable for any damage to the car which is due to improper installation or operation.
2.
Use the included monitor cable for mounting.
3.
Choose a suitable course for the cable leading from the selected mounting location to the vehicle's fuse box.
4.
Disconnect car battery.
5.
Look for the accessory clamp 12V+ in the vehicle's fuse box. This clamp will only deliver power if the ignition key is set to first position in the
ignition lock.
6.
Connect the cable's red wire to this clamp.
7.
Connect the cable's black wire to earth.
8.
OPTION: Pull the cable's blue wire and connect to positive cable of rear lamp. This serves as a break and provides power for the monitor
when the car is set to reverse.
CHECK POINT:
At this point, you can check whether you have connected the wires correctly, by:
-
connecting the battery again
-
turning the ignition key in the ignition lock to first position.
-
connecting the monitor cable to the monitor
-
pressing the monitor's ON/OFF button and waiting to see if the monitor is switched on.
If the camera has not yet been installed, then you will only see a blank screen/video noise. Before continuing with the installation, disconnect the
vehicle's battery.
9.
Look for the 12V+-cable for the car's rear lamp(s). Please read the manufacturer's operating instructions for further information, or consult the
vehicle's circuit diagram. This cable leads from a switch in the gearbox to the rear lamps.
10.
Connect the cable's blue wire with the rear lamps' 12V+ cables via the included Scotchlok® (cf. "Use of Scotchlok"®).
11.
The monitor is automatically turned ON when the gear is put into reverse, and OFF when the gear is not set to reverse.
Please read the operating instructions of the 3.5" LCD monitor for further information on the monitor controls.
7. Operation
7.1. Operating elements
A)
1
2
3
4
5
B)
20
1. On/off
D)
2. Audio/Video
3. Pivot
4. Brightness
5. Colour
A) USB port for charging of MP3 player, digital camera,
mobile phone, and more!
C)
B) Power supply via the 12V cigarette lighter socket.
C) AV output headset socket
D) AV input for DVD player and gaming console
7.2. Monitor menu functions
1.
With the ON/OFF button, the LCD monitor can be turned on/off. When the rear view camera is turned on, the monitor will be
automatically connected with the wireless rear view camera. If the camera has not been turned on or if there is no signal received,
then the monitor will display a BLUE screen/video signal noise. If the device is not in operation for 20 seconds, then the BLUE screen/
video signal noise will automatically be turned off. (Please note that this is a normal procedure.)
2.
AV
Fixed sound volume. (Please note that this monitor cannot produce sounds by itself.) The volume function works only with an
external audio output.
It is possible to connect headphones.
3.
V
V
X
X
normal image
mirror image
mirror upside down
image
The alignment of the visible screen can be adjusted using the Rotate button. Set the alignment according to the mounting method
selected.
4.
Press and hold the Brightness button till the screen displays the desired brightness.
5.
Press and hold the Colour button till the screen displays the desired colour setting.
A)
USB port
To charge USB devices. (Please note the USB port can only be used to charge your devices.)
B)
12V socket
Power output of the LCD monitor. Either use the 12V adapter or the power cable (included) for the monitor.
C)
The AV input allows for the connection of other components.
D)
The AV output allows for the connection of other components, e.g. headphones.
V
V
X
X
Forward upside down
normal image
image
21
Advertisement
Chapters
