Philips QV15.1E LA Service Manual page 34

Chassis
Table of Contents

Advertisement

EN 34
4.
QV15.1E LA
4.5.4
Power Supply Unit (PSU)
Caution: it is mandatory to remount all different screws at their
original position during re-assembly. Failure to do so may result
in damaging the PSU.
1. Gently unplug all connectors from the PSU.
2. Remove all fixation screws from the PSU.
3. The PSU can be taken out of the set now.
4.5.5
Speakers
1. Gently release the tapes that secures the speaker cables.
2. Unplug the speaker connectors from the SSB.
3. Take the speakers out.
When defective, replace the both units.
4.5.6
IR/LED Panel
1. Remove the fixation screws from the stand bracket, pull out
the assy from the set.
2. Gently release the cover secured by clips, then unplug the
connectors from the IR/LED board. The IR/LED Board can
be lifted and taken out from the cover.
When defective, replace the whole unit.
4.5.7
WIFI module
1. Unplug the connector from the SSB.
2. Remove fixation screw that secure the WIFI module,
Getntly remove the module from the set.
When defective, replace the whole unit.
4.5.8
LCD Panel
1. Remove the stand as described earlier.
2. Remove the rear cover as described earlier.
3. Remove the keyboard and ambilight as described earlier.
4. Remove the SSB as described earlier.
5. Remove the PSU as described earlier.
6. Remove the speakers as described earlier.
7. Remove the IR/LED board as described earlier.
8. Remove the WiFi module as described earlier.
9. Remove the fixations screws that fix the metal clamps to
the front bezel. Take out those clamps.
10. Remove all other metal parts not belonging to the panel.
11. Lift the LCD Panel from the bezel.
When defective, replace the whole unit.
4.6
Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
While re-assembling, make sure that all cables are placed
and connected in their original position. See
Figure
4-13.
Pay special attention not to damage the EMC foams on the
SSB shields. Ensure that EMC foams are mounted
correctly.
2015-Dec-18
Mechanical Instructions
Figure 4-1
and
back to
div. table

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents