Philips QV15.1E LA Service Manual page 26

EN 26 4. QV15.1E LA
4.3.7 IR/LED Panel
1. Remove the fixation screws from the stand bracket, pull out
the assy from the set.
2. Gently release the cover secured by clips, then unplug the
connectors from the IR/LED board. The IR/LED Board can
be lifted and taken out from the cover.
When defective, replace the whole unit.
4.3.8 RF4CE module
1. Unplug the connector from the SSB.
2. Remove fixation screw that secure the RF4CE module,
getntly remove the module from the set.
When defective, replace the whole unit.
4.3.9 WIFI module
1. Unplug the connector from the SSB.
2. Remove fixation screw that secure the WIFI module,
Getntly remove the module from the set.
When defective, replace the whole unit.
4.3.10 LCD Panel
1. Remove the stand as described earlier.
2. Remove the rear cover as described earlier.
3. Remove the keyboard and ambilight as described earlier.
4. Remove the SSB as described earlier.
5. Remove the PSU as described earlier.
6. Remove the speakers as described earlier.
7. Remove the IR/LED board as described earlier.
8. Remove the RF4CE module as described earlier.
9. Remove the WiFi module as described earlier.
10. Remove the fixations screws that fix the metal clamps to
the front bezel. Take out those clamps.
11. Remove all other metal parts not belonging to the panel.
12. Lift the LCD Panel from the bezel.
When defective, replace the whole unit.
2015-Dec-18
Mechanical Instructions
back to
div. table