Circuit Diagrams and PWB Layouts
10-7-3
Thermal Foams on 8700 series
Marvell 2k15 - 715G7259M0E000005T - Thermal Foams on 8700 series
TOP
Procedure Placing Thermal Foams
1. Select the appropriate thermal foams.
Refer to Spare Part BOM to select correct dimensions (thickness is CTN dependent).
2. Stick the thermal foams on the display panel referring to this drawing for correct location.
3. Mount the SSB.
Note
Thermal foams must be located directly under the IC's.
Silkscreen lines on the SSB mark the exact location.
QV15.1E LA
10.
EN 152
back to
2015-Dec-18
div.table
BOTTOM
Position MQ12
102.5±1
145.9±1
Position MQ11
38
Dimensions in mm
x
2015-xx-xx
2k15 Marvel EU#6
715G7259M0E000005T
Thermal Foam Location
19814_003_151207.eps
15-12-07