TABLE OF CONTENTS What’s in the Box Features & Specs Assembly Adjusting the Handlebar Changing the Batteries LED Lights Riding the Pixel Using the Rear Foot Brake Care and Maintenance Safety Warnings...
5. CHANGING THE BATTERIES Battery Door BATTERY DOOR 1. Open the Battery Door with a screwdriver. 2. Place 4 AAA batteries inside. 3. Close the Battery Door with that same screwdriver. 4. You’re all set!
6. LED LIGHTS LED LIGHT FUNCTIONS • Step on the Deck to turn on the LED Deck Lights. • The wheels are equipped with LED lights that will illuminate when riding, no batteries necessary (it’s on the house).
7. RIDING THE PIXEL • Place one foot in front. • Place the other foot in back, at a 70-90° angle. • Turn the handlebar to the left or right to make turns.
9. CARE AND MAINTENANCE CLEANING THE PIXEL To clean the Pixel, carefully wipe with a damp cloth, then dry with a dry cloth. Do not use water to clean the Pixel, this may damage the frame. STORAGE • Store the Pixel indoors, in a dry place.
10. SAFETY WARNINGS • For your safety, please read the user manual and safety warnings carefully, and make sure you understand and accept all the safety instructions. The user will be responsible for any loss or damage caused by improper use. •...
Page 13
MODIFICATIONS Do not attempt to disassemble, modify, repair, or replace the product or any components of the unit without instruction from Jetson Customer Support. This will void any warranty, and can lead to malfunctions which may cause injury. ADDITIONAL OPERATION CAUTIONS Do not lift the product off the ground while it is on and the wheels are in motion.
Need help?
Do you have a question about the PIXEL and is the answer not in the manual?
Questions and answers