Cisco Secure Network Server 3600 Series Hardware Installation Manual page 11

Cisco Secure Network Server 3600 Series Appliance Overview
5 System health
6 Power supply status
7 Fan status
8 Network link activity
• Green—The server is running in normal operating
• Green, blinking—The server is performing system
• Amber, steady—The server is in a degraded
• Amber, 2 blinks—There is a major fault with the
• Amber, 3 blinks—There is a major fault with the
• Amber, 4 blinks—There is a major fault with the
• Green—All power supplies are operating normally.
• Amber, steady—One or more power supplies are in
• Amber, blinking—One or more power supplies are
• Green—All fan modules are operating properly.
• Amber, blinking—One or more fan modules breached
• Off—The Ethernet Lights Out Management (LOM)
• Green—One or more Ethernet LOM ports are
• Green, blinking—One or more Ethernet LOM ports
Cisco Secure Network Server 3600 Series Appliance Hardware Installation Guide
condition.
initialization and memory check.
operational state (minor fault). For example:
• Power supply redundancy is lost.
• CPUs are mismatched.
• At least one CPU is faulty.
• At least one dual in-line memory module
(DIMM) is faulty.
• At least one drive in a RAID configuration failed.
system board.
DIMMs.
CPUs.
a degraded operational state.
in a critical fault state.
the non-recoverable threshold.
port link is idle.
link-active, but there is no activity.
are link-active, with activity.
Front Panel LEDs
7