YASKAWA YRC1000 Instructions Manual page 11

HW1483372
2 Setting of the Interrupt Job Function
2.1 Interruption Table Display
EXEC
(ON): Interrupting job in progress
(OFF): Interrupting job not in progress
"Exec" turns ON when an interruption signal is received and the inter-
rupt job is called, and turns OFF when the job is completed.
"Exec" turns OFF in the following cases:
• An interrupt job is completed and the suspended job is restarted.
• Another job is called.
• CLEAR STACK instruction is executed.
{INTERRUPT JOB} appears when the security mode is the
NOTE
edit mode or management mode.
2-2
HW1483372
11/27