Get Ndis Preference - Sierra Wireless AC595 Developer's Manual

Table B-10: Setup stage
Offset
0
1
2
4
6
Table B-11: Data stage (IN)
Offset
0
Rev 1.9 Sep.08

Get NDIS Preference

Tells the module to indicate if the NDIS driver is established or
disabled.
Stages:
Setup (Indicate that module should report NDIS
•
preference)
Data (In—Indicates NDIS preference)
•
• Status (Out—Indicates that host has received the response)
Size (bytes) Field
1 Request type
1 Request
2 Value
2 Index
2 Length
Size (bytes) Field
Preference
2
Status stage (OUT)
Host sends a zero‐length packet after receiving the Data stage
content from the module.
Proprietary and Confidential
Vendor-specific commands
Value
0xC0
0x05
0x0000 (not used)
0x0000 (not used)
0x0002 (length of data in Data stage)
Value
NDIS preferred
0x0000 Not preferred
•
0x0001 Preferred
•
• 0x00FF Unknown (keep polling, modem
not ready to respond)
63