Finalizing the Installation
Right Front Log Placement
The right log has two holes on the bottom. Place the log so both burner pins insert into the holes
on the log (see photos below). Make sure the log is pushed back so it sits flat.
Left Cross Log Placement
Place left cross log as shown below. Note- how the log rests on the flat spots of the back and left
logs.
© Travis Industries
12/27/2018 - 1440
(for qualified installers only)
NOTE: On LP push the log to
the back. On NG pull the log
forward.
Berkshire GSR2 3-Sided
29