Table of Contents
Advertisement
BiPAC 7402R2 ADSL2+ VPN Firewall Router
Mode: You may select Stateful or Stateless mode. The key will be changed every 256 packets when
you select Stateful mode. If you select Stateless mode, the key will be changed in each packet.
Idle Time: Auto-disconnect the VPN connection when there is no activity on the connection for a
predetermined period of time. 0 means this connection is always on.
Click Apply button to apply your changes.
IPSec (IP Security Protocol)
Click Create to create a new IPSec VPN connection account.
After you have created the IPSec connection, account information will be displayed. (See example
above).
Enable / Disable: This function activates or deactivates the IPSec connection. To wish interrupting
the tunnel, check Disable radio button and click Apply button to deactivate the connection.
Name: This is the user-defined name of the connection.
Local Subnet: Displays IP address and subnet of the local network.
Remote Subnet: Displays IP address and subnet of the remote network.
Remote Gateway: This is the IP address or Domain Name of the remote VPN device that is connected
and established a VPN tunnel.
IPSec Proposal: This is selected IPSec security method.
73
Chapter 4: Configuration
Advertisement
Table of Contents
