Table of Contents
Advertisement
BiPAC 7402R2 ADSL2+ VPN Firewall Router
PVID for Untagged Frames: PVID is known as Port VLAN Identifier. When an untagged packet is
received by input port(s), this packet will be tagged with specified PVID.
From the example, VPI and VCI only section need to be filled-in and just leave the rest as is. Repeat the
same procedure by clicking Create
select RFC1483 Bridged
fill-in the rest of PVC 0/34 to 0/39.
Step 3: Setup VLAN Service
Go to Configuration
Advanced
VLAN Bridge
DefaultVlan lists all member ports. It is necessary to group specific member ports for each VLAN.
From the example, two VLAN groups are requested: Data and Video.
To create another VLAN group for Video by clicking Create VLAN.
Given a name and ID (PVID) to identify the Video group. The valid value range for PVID is 1 ~ 4094.
From the example:
VLAN untagged ports for Data/Internet: ethernet, wireless and wireless_wds.
VLAN untagged ports for Video: ethernet1, rfc-1483-0 ~ rfc-1483-6.
Click Apply to made change effective immediately.
128
Chapter 4: Configuration
Advertisement
Table of Contents
