Billion BiPAC 7402R2 User Manual page 66

Adsl2+ vpn firewall router
Hide thumbs Also See for BiPAC 7402R2:
Table of Contents

Advertisement

Configuring Packet Filter:
1.
Click Port Filters. You will then be presented with the predefined port filter rules screen (in this
case for the low security level), shown below:
You may click Edit the predefined rule instead of Delete it. This is an example to show to how you add a
Note:
filter on your own.
2.
Click Delete to delete the existing HTTP rule.
3.
Click Add TCP/UDP Filter.
Click Add TCP/UDP Filter
4.
Input the Rule Name, Time Schedule, Source/Destination IP, Type, Source/Destination Port,
Inbound and Outbound.
Example:
Application: Cindy_HTTP
Time Schedule: Always On
Source / Destination IP Address(es): 0.0.0.0
use the port-filter)
Type: TCP (Please refer to Table1: Predefined Port Filter)
Source Port: 0-65535
Redirect Port: 80-80
Inbound / Outbound: Allow
Chapter 4: Configuration
(I allow all ports to connect with the application))
(This is Port defined for HTTP)
BiPAC 7402R2 ADSL2+ VPN Firewall Router
(I do not wish to active the address-filter, instead I
Click Delete
62

Advertisement

Table of Contents
loading

Table of Contents

Save PDF