Advertisement
Remote Sensing New Features
Example of programming a priority for the SLEEP time period:
the program should remain on system average. When on the SLEEP time period during programming, press
NEXT ZONE until Bedroom 1 shows. During the SLEEP time period the other remotes in the house will be
ignored and the system will be controlled only by the ambient temperature of the remote in the master
bedroom. The WAKE, LEAVE and RETURN temperature will be controlled by the system average.
New Features on the Thermostat After a remote is Connected
NEXT ZONE KEY
Mon
10:03
AM
74
LEAVE
SYSTEM AVERAGE
Next Zone
NEXT ZONE
key cycles
through ambient temperatures
for connected zones.
In this example,
the name of the
Set At
+
74
zone currently
having priority is
SYSTEM
AVERAGE.
SYSTEM
System average
is the average of all
Cool
connected sensors.
F
FAN
is the ambient
Local
Auto
temperature of the
Menu
Thermostat.
The name of the
can be
REMOTE
displayed. This
shows it has priority.
New Features on the Thermostat After a remote is Connected
THERMOSTAT HOLD
Mon
10:03
AM
Hold
74
LEAVE
SYSTEM AVERAGE
Next Zone
Hold
To put the thermostat into hold
select system average or the zone
you want to hold. Then use the
arrows to adjust the setpoint.
Then press the
HOLD
Remote Sensing New Features
(PERMANENT)
Indicates
HOLD:
Set At
+
74
the Thermostat is in
permanent
A permanent
HOLD
can be
SYSTEM
active for system
average, local, or
Cool
any
REMOTE.
F
FAN
Run Schedule:
Run Schedule
Auto
Will cancel any
holds and return
the system to the
program .
key.
HOLD.
Advertisement
