Download Print this page

Pro1 Technologies RZ251W Operation Manual page 3

Advertisement

Quick Reference
Getting to know your indoor remote sensor
Set At
74
+
74
REMOTE 1
Run
Clean
Wireless Range
Range between the remote and the
master thermostat is approximately
100 feet with no obstructions and
approximately 50 feet in standard
residential metal, brick, and
concrete construction.
LCD
Glow in the Dark Light Button*
Temperature Setpoint Keys**
Remote Name
Run and Clean Keys**
*NOTE ABOUT THE LIGHT BUTTON:
This button is used to light up the display.
DO NOT hold the light button down for
longer than 3 seconds or you will enter the
technician setup screens. If inadvertently
enter the tech setup press and release the
light button a second time to exit the tech
screens.
**NOTE ABOUT SETPOINT, RUN, AND
CLEAN KEYS:
These keys will only be shown if they have
been turned on in Technician Setup menu.
Setpoint Temperatur e
Displays the user selectable
setpoint temperatur e.
Wi re less Icon
88
Temperatur e
Indicates the curr ent
ambient temperatur e.
REMOTE 1
Clean Key
Pr essing the CLEAN key
will allow 30 seconds to
clean the display . The keys
will be inoperable during
this time. NOTE: The
SHO W
SET mode must be set to
YES in tech setup menu
before the CLEAN key will
be displayed.
Mercury Notice:
All of our products are mercury free. However, if the product you are replacing contains
mercury, dispose of it properly. Your local waste management authority can give you
instructions on recycling and proper disposal.
Quick Reference
Setpoint Adjustment Keys
Set At
NOTE: The SHOW SET
must
88
+
be set to YE S in tech setup
menu befor e the setpoint
keys will be shown in the
displa y.
Low Battery Indicato
r
Replace batteries when
this indicator is shown.
Remote Label
Each indoor r emote
Run
sensor can be labeled.
The label options can be
Clean
found during tech setup.
Run Key
RUN only shows if the
remote sensor setpoint
has been changed.
Pr essing RUN will cancel
the temporary setpoint hold.
Note: The SHOW SET
must
be set to YES in tech setup
menu befo re the RUN key
will be shown in the display .

Advertisement

loading