Advertisement
Installing Batteries
Temporary Wall Mount or Table Placement
1
remote to remove the battery door.
Once you have removed the door from the back
2
of the remote, insert 2 AA Alkaline batteries and
replace the battery door.
Inserting Batteries for Permanent Wall Mount
Remove the remote from
1
the subbase. It is held
on the subbase by a
plastic tab on the bottom
of the remote sensor.
head screwdriver to remove
it from the subbase.
Once you have
2
removed the remote
from the subbase,
insert 2 AA Alkaline
batteries.
Attach the remote
3
to the subbase by
aligning the two top
tabs and then close
as shown.
Installing Batteries
Bottom of
Remote Sensor
Top tabs
Inside view
Reset button
Swing closed
Advertisement
