Advertisement
Quick Links
Advertisement
Related Manuals for Pro1 Technologies RZ251W
Summary of Contents for Pro1 Technologies RZ251W
- Page 1 Operation Manual Operation Manual...
- Page 2 Web: www.pro1iaq.com Hours of Operation: M-F 9AM - 6PM Eastern This manual covers the following models: • RZ251W (For use with 955WH Remote Sensing Thermostat and the Z955W Zoning System.) Congratulations on purchasing our Wireless System. This remote sensor was designed to the highest reliability and ease of use standards.
- Page 3 Quick Reference Quick Reference Getting to know your indoor remote sensor Setpoint Temperatur e Displays the user selectable setpoint temperatur e. Setpoint Adjustment Keys Set At Set At NOTE: The SHOW SET must be set to YE S in tech setup Glow in the Dark Light Button* Wi re less Icon menu befor e the setpoint...
- Page 4 Zoning Quick Reference Zoning Quick Reference Getting to know your indoor remote sensor Setpoint Temperatur e Displays the user selectable setpoint temperatur e. Set At Setpoint Adjustment Keys Set At NOTE: The SHOW SET must Wi re less Icon be set to YE S in tech setup Glow in the Dark Light Button* menu befor e the setpoint keys will be shown in the...
- Page 5 Mounting Locations Mounting Locations Wall Mount - Removable Recommended Wall Mounting Locations The remote sensor should be mounted or placed approximately 4 to 5 feet above the Mount T-bracket on the wall. floor. Select an area with average temperature and good air circulation. Wall mount slots...
- Page 6 Mounting Options Mounting Options Desk or Counter Option Slide the T-bracket Remove the remote from the subbase. up into the slot holders. Mount subbase to the wall T-bracket will stop on the top of the slot holders. Inside View of Subbase of Remote Sensor...
- Page 7 Installing Batteries Installing Batteries Temporary Wall Mount or Table Placement Inserting Batteries for Permanent Wall Mount Remove the remote from remote to remove the battery door. the subbase. It is held on the subbase by a plastic tab on the bottom of the remote sensor.
-
Page 8: Permanent Hold
Remote Sensing New Features Remote Sensing New Features New Features on the Thermostat After a remote is Connected Example of programming a priority for the SLEEP time period: the program should remain on system average. When on the SLEEP time period during programming, press NEXT ZONE until Bedroom 1 shows. - Page 9 Remote Sensing New Features Remote Sensing New Features New Features on the Thermostat After a remote is Connected (4 HOURS) TEMPORARY HOLD Indicates the Master Thermosta t REMOTE: is in hold. The setpoint will now SETPOINT NOT DISPLAYED display the temporary override setpoint. 10:03 Set At 10:03...
- Page 10 Warranty Warranty Registration: Your new thermostat has a 5 year limited warranty. You must register your warranty within 60 days of installation. You can register your new thermostat in 2 ways. Go to our company website, select warranty registration and fill out a short registration.
- Page 11 Cut Out For Warranty Registration www.pro1iaq.com...